Christie Digital Systems LX605 Part Names and Functions Remote Control Code, Adjustable Feet

Part Names and Functions

Remote Control Code

The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See “Remote control” in the Setting Menu on page 56.

1	Press and hold the MENU and a number button (1–8) for
	more than five seconds to switch between the codes.	MENU button
2
	To initialize the remote control code, slide the RESET/ ON/
	ALL-OFF switch to “RESET”, and then to “ON”. The initial

code is set to Code 1.

Number buttons (1-8)

RESET/ON/ALL

OFF Switch

Press and hold the MENU and a number button (1-8) that corresponds to the remote control code for more than five seconds to switch between the codes.

Adjustable Feet

Projection angle can be adjusted up to 4.0 degrees with the adjustable feet.

Rotate the adjustable feet and tilt the projector to the proper height; to raise the projector, rotate the both feet clockwise.

To lower the projector or to retract the adjustable feet, rotate the both feet counterclockwise.

To correct keystone distortion, press the KEYSTONE button on the remote control or select Keystone from the menu (see pages 14, 31, 44, 50).

	Adjustable Feet
16	LX505/LX605 User Manual
	002-000232-01 Rev.1 (12-2009)