Christie Digital Systems LX605 Computer Input Auto PC Adjustment, PC adjust Menu, Auto PC adj

Computer Input

Auto PC Adjustment

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Position H and Position V positions to conform to your computer.

Direct Operation Remote Control

The Auto PC adjustment function can be operated directly by pressing the AUTO PC button on the remote control.

AUTO PC button

Menu Operation

Auto PC adj.

1Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select PC adjust and then press the Point ► or the SELECT button.

2Use the Point ▲▼ buttons to select Auto PC adj. and then press the SELECT button.

To store the adjusted parameters.

The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting Mode in PC SYSTEM Menu (p.36). See “Manual PC Adjustment” on pages 38-39.

PC adjust Menu

Auto PC adj.	0
Fine sync
Total dots	1366
Position H	0
Position V	0
Current mode
Clamp	0
Display area H	1024
Display area V	768
Reset
Mode free
Store

Use the Point ▲▼ buttons to select Auto PC adj. and press the SELECT button.

Please wait... appears while the Auto PC adjustment is in process.

￿Note:

•Fine sync, Total dots, Position H and Position V position of certain computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required. (pp.38-39)

•Auto PC Adjustment cannot be operated in Digital Signal Input on the DVI terminal and 480p, 575p, 480i, 575i, 720p, 1035i, 1080i or 1080p is selected on the PC SYSTEM Menu.

•Depending on the condition of signals and the type and length of cables, the signals may not be properly viewed.

Auto PC adj.

Fine sync	0
Total dots	1366
Position H	0
Position V	0
Current mode
Clamp	0
Display area H	1024
Display area V	768
Reset
Mode free
Store

LX505/LX605 User Manual	37
002-000232-01 Rev.1 (12-2009)