Christie Digital Systems LX605 manual Logo PIN code lock, Capture

Setting

Capture

This function enables you to capture an image being projected to	Capture
use it for a starting-up display or interval of presentations.
Select Capture and press the SELECT button.
A confirmation box appears and select Yes to capture the projected
image.
After capturing the projected image, go to the Logo select function
and set it to User. Then the captured image will be displayed the
next time you turn on the projector.
To cancel the capture function, select Yes in the "Quit?" confirmation
box.

￿Note:

•Before capturing an image, select Standard in the Image Select Menu to capture a proper image (pp.40, 46).

•A signal from a computer can be captured up to XGA (1024 x 768). A signal from video equipment can be captured except for 720p, 1035i, 1080i and 1080p.

•When capturing the image that has been adjusted by the Keystone function, the adjusted data is automatically reset and the projector captures an image without keystone correction.

•When Logo PIN code lock is set to On, Capture cannot be selected.

•When starting to capture a new image, the previously stored image is cleared even if you cancel the capturing.

•When there is no captured image or it is interrupted while capturing an image, User cannot be selected, you can only switch between Default and Off.

Logo select

Off

Logo PIN code lock

This function prevents an unauthorized person from changing the screen logo.

Off	The screen logo can be changed freely from the
	Logo Menu (p.52).
On	The screen logo cannot be changed without a Logo
	PIN code.

If you want to change the Logo PIN code lock setting, press the SELECT button and the Logo PIN code dialog box appears. Enter a Logo PIN code by following the steps below. The initial Logo PIN code is set to "4321" at the factory.

Logo PIN code lock

Logo select

Off

LX505/LX605 User Manual

002-000232-01 Rev.1 (12-2009)

53