Christie Digital Systems LX605 manual On start, Pointer, Timer

Setting

On start

When this function is set to On, the projector will be automatically turned on just by connecting the AC power cord to the wall outlet.

￿Note:

Be sure to turn off the projector properly (see “Turning Off the Projector” on page 24). If the projector is turned off in the incorrect sequence, the On start function does not work properly.

Pointer

You can emphasize a part of the projected image with this function. Use the Point ▲▼ buttons to select a pattern of the Pointer (Arrow, Finger, or Dot) (p.32)

P-timer

This function allows you to change the presentation of the P-timer and execute it.

Select one of the following options:

Count up	The P-timer display 000:00 appears on the
	screen and the count starts (000:00–180:00)
Count down	The time set in the Timer setting appears on
	the screen and the countdown starts.
Timer	Use the Point ▲▼ buttons to set the Timer
	(1–180 Min). Only set to Count down, Timer
	is active. Factory default velue is 10 Min.
Start	It executes the count up or count down
	function. Press the SELECT button at Start,
	Start changes to Stop in the Screen Menu.
	At that time, press the SELECT button at
	Stop to stop Count up or Count down, and
	Stop changes to Restart in the Screen Menu.
	Press the SELECT button at Restart to
	resume Count up or Count down.
Reset	Reset the P-timer values.
	Press the SELECT button at Reset to return
	to the following value;
	Count up ... "000:00"
	Count down ... Timer that you set
Exit	To exit the P-timer operation.

Stop or Cancel the P-timer via Remote Control

To stop the P-timer, press the P-TIMER button.

To cancel the P-timer, press and hold the P-TIMER button for a few seconds.

P-TIMER

P-timer display

Standby mode	Network
On start	On
Pointer	Dot
P-timer
Security
Shutter
Video delay control	Off
Filter counter
Test pattern
Factory default

P-Timer

Count up

Count down

Timer	30 Min
Start		min
Reset
Exit

P-Timer

Count up

Count down

Timer	30	Min
Start
Reset
Exit

58	LX505/LX605 User Manual
	002-000232-01 Rev.1 (12-2009)