Christie Digital Systems LX605 Setting, RC sensor, Power management, Standby mode, Front & Top

Setting

RC sensor

Select a location of the infrared remote receiver of the remote control. See “Remote Control Receivers and Operating Range” on page 15 for details.

All	Activate all of the receivers.
Front & Top . .		. . . .Activate both the front and top receivers.
Top & Back . .		. . . .Activate both the top and back receivers.
Front & Back		. . . .Activate both the front and back receivers.	Power management
Front	Activate only the front receiver.
Top	Activate only the top receiver
Back	Activate only the back receiver.

Power management

For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period.

Select one of the following options:

Ready	When the lamp has been fully cooled down, the
	POWER indicator changes to green blinking. In
	this condition, the projection lamp will be turned
	on if the input signal is reconnected or any
	button on the side control or remote control is
	pressed.
Shut down	When the lamp has been fully cooled down, the
	power will be turned off.
Off	Power management function is off.
Timer	If the input signal is interrupted and no button
	is pressed for more than 30 seconds, the timer
	display with No signal appears. It starts the
	countdown until the lamp is turned off. Use the
	Point ▲▼ buttons to set the Timer(1~30Min).

￿Note:

•Factory default is Ready: 5 Min.

•When the shutter is closed while the Power management function is working, the Power management function is released.

Timer left before Lamp is off.

Language	English
Menu position
	Mode 1
Input button
Display	On
Background	Blue
Logo
Lamp control
Filter control
Fan control	Normal
Simple mode	On
Remote control	Mode 1
RC sensor	Back
	1/2

Min

Standby mode

This function is available when operating the projector via network.

Network	Supply the power to the network function
	even after turning off the projector. You can turn
	on/off the projector via network, modify network
	environment, and receive an e-mail about
	projector status while the projector is powered off.
Eco	Select Eco when you do not use the projector
	via network. The projector’s network function will
	stop when turning off the projector.

Refer to the owner’s manual of “Network Set-up and Operation”.

￿Note:

•Factory default is Network.

•When selecting Network, the cooling fans may be running depending on the temperature inside the projector even if the projector is turned off.

Min

LX505/LX605 User Manual	57
002-000232-01 Rev.1 (12-2009)