Christie Digital Systems LX605 manual Installation Connecting to Video Equipment Video, S-video

Installation

Connecting to Video Equipment (Video, S-video)

Cables used for connection (￿ = Cables not supplied with this projector.)

• Video cable (RCA x 1 or RCA x 3) ￿	Analog Out Signal Table
• BNC cable (BNC x 1 or BNC x 3) ￿
		Input Terminal		Monitor Out	Cable
• S-video cable ￿		D-sub15	RGB (PC analog)	YES
• Scart-VGA cable ￿	Input 1		RGB (SCART)	NO
			RGB (PC digital)	NO
• DVI-Digital cable ￿		DVI-D
			RGB (AV HDCP)	NO
			RGB	YES
	Input 2	5 BNC	Video	YES	￿
			Y, Pb/Cb, Pr/Cr	YES	￿
Unplug the power cords of		RCA	Y, Pb/Cb, Pr/Cr	YES	￿
	Input 3	S-video	S-video	NO
both the projector and external		Video	Video	YES	￿
equipment from the AC outlet	Network			NO
before connecting cables.

￿A cable with one end D-sub 15 and the other end (Black box) compatible with each equipment is necessary.

Component

Composite Video Output Component Composite

Video (Y, Pb/Cb, Cr/Pr) Video Output Video

BNC
	RCA
cable	cable

		Digital Output
S-video	RGB Scart	(HDCP
Output	21-pin Output	compatible)

Refer to the AnalogOut Signal Table (above).

S-video	Scart-VGA	DVI-Digital
cable	cable		cable

Video Y - Pb/Cb - Pr/Cr Y - Pb/Cb - Pr/Cr Video ANALOG OUT S-VIDEO ANALOG IN DIGITAL IN

20	LX505/LX605 User Manual
	002-000232-01 Rev.1 (12-2009)