Christie Digital Systems LX605 manual Projector Condition, Appendix, Indicators

Appendix

The projector is detecting abnormal condition.

			Indicators					Projector Condition
POWER		LAMP	TEMP.		FILTER	SHUTTER	REPLACE
			WARNING		WARNING		LAMP
green		red		red	orange	blue	orange
		￿				￿	￿	If the Filter counter reached a time set in the timer setting, a Filter
								replacement icon (Fig.2) appears on the screen and the WARNING
								FILTER indicator on the top panel lights up. Replace the filter as
								soon as possible. If the filter is out of scroll and the projector reaches
								a time set in the timer setting, Fig. 3 appears on the screen and the
Fig.2	Filter replacement icon							WARNING FILTER indicator lights up. Replace the filter cartridge as
								soon as possible.
								If the filter is clogged and no scroll is left in the filter cartridge, a Filter
								cartridge replacement icon (Fig.4) appears on the screen and the
								WARNING FILTER indicator lights up. Replace the filter cartridge as
Fig.3								soon as possible.
								￿Note:
								Fig.2, Fig.3 and Fig.4 icon will not appear when the Display function is
								set to Off (p.52) or during “Freeze” (p.30).
Fig.4	Filter cartridge replacement icon
								The filter cartridge is not installed in the projector. Check the filter
								compartment to see if the filter cartridge is installed in the projector.
								When the filter cartridge is installed and the indicators continue to
						￿		light and blink, read the column below.
							The projector detects an abnormal condition and cannot be turned
								on. Unplug the AC power cord and plug it again to turn on the
								projector. If the projector is turned off again, unplug the AC power
								cord and contact the dealer or the service center. Do not leave the
								projector on. It may cause an electric shock or a fire hazard.
￿		￿		￿	￿		￿	The shutter is out of control.
					￿		￿	The shutter is out of control. (The projector is in the cooling mode.)
					￿		￿	The shutter is out of control. (The projector is in the stand-by mode.)
								In that case, contact the service station immediately.

78	LX505/LX605 User Manual
	002-000232-01 Rev.1 (12-2009)