Sharp MX-5500N, MX-6200N Press the COLOUR START key, or the BLACK & WHITE, To cancel scanning

Set the number of copies (number of sets) with the numeric keys.

3

If an incorrect number of copies is set...

Up to 999 copies (sets) can be set. When the [COLOUR

START] key ( ) or the [BLACK & WHITE START] key

( ) is pressed, the copies will automatically be divided between the master and slave machines.

If an odd number of copies is set, the master machine will print the extra set.

Press the [CLEAR] key ( ) and then enter the correct number.

Press the [COLOUR START] key

or ( ) or the [BLACK & WHITE

START] key ( ).

Copying will begin.

If you are using the document glass, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first original.)

The following screen appears when the [START] key is pressed.

Starting tandem operation.

Please wait.

4

After the message appears, tandem copying begins.

If tandem copying is not possible, the following screen appears.

Tandem output is not allowed.

Output all sets using master machine? (Cancel will delete the job.)

OKCancel

To have the master machine make all copies, touch the [OK] key. To cancel the job, touch the [Cancel] key.

•To cancel scanning...

Press the [STOP] key ( ).

•To cancel tandem copying...

Touch the [STOP] keys ( ) on both the master machine and the slave machine.

59