Sharp MX-7000N, MX-6200N Storing, editing, and deleting text strings, Touch the Store/Delete key

Storing, editing, and deleting text strings

1	Touch the [Text] key in the stamp selection screen.
	See steps 1 to 4 of "GENERAL PROCEDURE FOR USING STAMP" (page 87).

2

Stamp
Text						Cancel	OK
							First Page
				Print Colour
		Pre-Set
					Bk(Black)		All Pages
	Recall		Store/Delete
				Direct Entry

Touch the [Store/Delete] key.

Stamp
Text				Back
	5	10
Store/Delete
					1
					3
	No.01 AAA AAA		No.02 BBB BBB
	No.03 CCC CCC		No.04 DDD DDD
	No.05		No.06
	No.07		No.08
	No.09		No.10

Store a text string, or edit/delete a stored text string.

•To store a text string, touch a key with no text stored.

A text entry screen will appear. A maximum of 50 characters can be entered. To enter text, see "6. ENTERING TEXT" in the User's Guide. When you have finished entering the text, touch the [OK] key. The text entry screen will close.

•To edit or delete a text string, follow the instructions below.

	To edit or delete a text string...
3	• When the key with the text string is touched, the following screen appears.
	When the [Amend] key is touched, a text entry screen appears. The stored text string appears in the text entry
	screen. Edit the text. To enter text, see "6. ENTERING TEXT" in the User's Guide. When you have finished entering
	the text, touch the [OK] key. The text entry screen will close.
	• When the [Delete] key is touched, the stored text is deleted.
	A text has been already stored to this
	location. Change the text?
	Cancel	Delete	Amend

•Text settings can also be configured in the Web pages. Click [Application Settings], [Copy settings] and then [Text Settings (Stamp)] in the Web page menu.

100