Sharp MX-7000N, MX-6200N manual Touch the OK key, Press the COLOUR START key, or the BLACK & WHITE

4

Image Edit			OK
M.Page Enlarge		Cancel	OK
Enlargement Size	Original Size	Original Orientation
(A Size)
			1
A2	A5		3
A1	A4
A0	A3
A0x2

Touch the [OK] key.

You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode.

Press the [COLOUR START] key

or ( ) or the [BLACK & WHITE

START] key ( ).

5

To cancel scanning and copying...

Press the [STOP] key ( ).

Copying will begin.

If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first original.

•The original must be placed on the document glass.

•Overlap of sections of image

•There will be a margin around the edges of each copy.

•Areas for overlapping the copies will be created at the leading and trailing edges of each copy.

•If an original size is selected first, a message will appear indicating the enlargement sizes that can be selected. If an enlargement size is selected first, a message will appear indicating the original sizes that can be selected.

•If a combination of settings is selected for which multi-page enlargement is not possible, invalid selection beeps will sound.

•The paper size, number of sheets required for the enlarged image, and the ratio are automatically selected based on the selected original size and enlargement size.

(The paper size and ratio cannot be selected manually.)

•If no paper trays have the size of paper that was automatically selected, "Load XXX paper" will appear. Change the paper in one of the trays or the bypass tray to the indicated size of paper.

To cancel the multi-page enlargement setting...

Touch the [Cancel] key in the screen of step 2.

109