Sharp MX-7000N, MX-6200N, MX-5500N Selecting single colour copying, Selecting 2 colour copying

Selecting single colour copying

When [Single Colour] is selected for the colour mode, the following screen appears. Touch the desired colour and touch the [OK] key.

Colour Mode		OK
Single Colour		OK
R(Red)	G(Green)	B(Blue)
C(Cyan)	M(Magenta)	Y(Yellow)

Selecting 2 colour copying

When [2 Colour] is selected for the colour mode, the following screen appears. Touch the desired colour and touch the [OK] key.

Colour Mode		OK
2 Colour		OK
Select a colour other than black.
R(Red)	G(Green)	B(Blue)
C(Cyan)	M(Magenta)	Y(Yellow)

• When auto mode is used, there may be some originals for which switching between colour and black & white does not take

place correctly. In this event, press the [COLOUR START] key ( ) or the [BLACK & WHITE START] key ( ) as appropriate to manually switch between colour and black & white.

•Copying takes place in black & white when the [BLACK & WHITE START] key ( ) is pressed, regardless of the colour mode setting.

System Settings (Administrator): Colour Mode

This is used to change the default colour mode setting.

System Settings (Administrator): Detect Standard in Auto Colour Mode

When the colour mode is set to auto, the discrimination point for detecting whether originals are colour or black and white can be set to one of 5 levels.

25