Sharp MX-7000N, MX-6200N, MX-5500N manual Select the bypass tray, or the BLACK & WHITE, START key

7

	(1)	(2)
Paper Select		OK
	Paper Tray	Bypass Tray
1. A4	2. A4	A4
Plain	Plain	Plain
3. A3	Plain
4. B4	Plain

Select the bypass tray.

(1)Touch the paper size key of the bypass tray.

(2)Touch the [OK] key.

Press the [COLOUR START] key

or ( ) or the [BLACK & WHITE

START] key ( ).

8

To cancel scanning of the original and copying...

Press the [STOP] key ( ).

Scanning begins.

•If the originals were placed in the document feeder tray, the originals are copied.

•If you placed the originals on the document glass, scan each page one page at a time.

When using sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then press the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first original.

When the inserter is installed, the "Extra" size paper loaded in the bypass tray will be delivered to the right tray.

43