Sharp MX-7000N CHECKING COPIES BEFORE PRINTING Proof Copy, Select Proof Copy, Place the original

CHECKING COPIES BEFORE PRINTING (Proof Copy)

This feature prints only one set of copies, regardless of how many sets have been specified. After the first set is checked for errors, the remaining sets can be printed. Previously it was necessary to re-scan the original each time changes to settings were required. However, this feature makes it possible to change settings for the scanned original without scanning it again, allowing you perform copying more efficiently.

"Proof Copy" is	1 set of copies is
selected and 5 sets of	printed for you to
copies are executed	check
A	A

Adjust the settings

	The remaining 4
	sets are printed
If OK	A	A
	A	A

A	A	A
	A	A
	If OK
After adjustments are	The remaining 4 sets
made, 1 set is printed	are printed
for you to check

1	Place the original.
	Place the original face up in the document feeder tray, or face down on the document glass.
2	Select copy settings in the base screen.

(3) (2) (4)

Select Proof Copy.

3

Special Modes
	Stamp	Image Edit
	Quick File		File
	Slow Scan
		Mixed Size
	Original		Mode

Colour

Adjustments

Proof Copy

OK

2

2

(1)Touch the [Special Modes] key.

☞SPECIAL MODES (page 44)

(2)Touch the keys to switch through the screens.

(3)Touch the [Proof Copy] key so that it is highlighted.

(4)Touch the [OK] key.

124