Sharp MX-6200N, MX-7000N, MX-5500N manual Select card shot settings, Enter the original size

4

(1)		(2)
Special Modes		OK
Card Shot	Cancel	OK

X86 (25~210)

mmFit to (A) Page

Y54 (25~210)mm

Size Reset (B)

Select card shot settings.

(1) Enter the original size.

With the [X] key highlighted, enter the X (horizontal)

dimension of the original with the keys.

Touch the [Y] key and enter the Y (vertical) dimension of

the original with the keys.

(A)To enlarge or reduce the images to fit the paper based on the entered original size, touch the [Fit to Page] key.

(B)The [Size Reset] key can be pressed to return the horizontal and vertical dimensions to the values set in "Card Shot Settings" in the system settings (administrator).

(2)Touch the [OK] key.

You will return to the base screen of copy mode. Make sure that the entered dimensions appear in the [Original] key.

or

5

To cancel scanning...

Press the [STOP] key ( ).

Press the [COLOUR START] key

() or the [BLACK & WHITE START] key ( ) to scan the front side of the card.

Turn the card over and press the

[COLOUR START] key ( ) or the

or[BLACK & WHITE START] key ( ) to scan the reverse side of the card.

6	Use the same [START] key that you used for the front side of
	the card.

To cancel scanning...

Press the [STOP] key ( ).

Touch the [Read-End] key.

Place next original. Press [Start].	Copying will begin.
When finished, press [Read-End].

7 Read-End

To cancel copying...

Press the [STOP] key ( ).

84