Sharp MX-5500N Paper Trays, Touch the Paper Select key, Select the tray that you want to use

PAPER TRAYS

The machine is set to automatically select a tray that has the same size of paper as the size of the placed original (automatic paper tray selection).

If the correct paper size is not selected or you wish to change the paper size, you can select the paper tray manually.

Colour Mode								Special Modes
Full Colour
								2-Sided Copy
							Plain
							A4
								Output
Exposure
		1.		2.
		A4		A4
Auto		3.	A3					File
		4.	B4
								Quick File
Copy Ratio	Original				Paper Select
100%	Auto					Auto
						A4

A4 Plain

Touch the [Paper Select] key.

1 You can also touch the paper size display (A) to open the paper tray settings.

(A)

Colour Mode

Full Colour

Exposure

	Special Modes
	2-Sided Copy
	Plain
	A4
	Output
1.	2.

Auto	A4	A3	A4
	3.		File
	4.	B4
			Quick File
Copy Ratio	Original		Paper Select
100%	Auto		Auto
			A4

A4 Plain

2

(1)		(2)
Paper Select		OK
	Paper Tray	Bypass Tray
1. A4	2. A4	A4
Plain	Plain	Plain
3. A3	Plain
4. B4	Plain

Select the tray that you want to use.

(1)Touch the key of the desired tray.

(2)Touch the [OK] key.

You will return to the base screen and the selected tray will be highlighted.

If the selected tray runs out of paper during a copy job and there is another tray that has the same size and type of paper, that tray will be automatically selected and the copy job will continue.

To return to automatic paper tray selection after selecting a tray manually, press the [CLEAR ALL] key ( ).

System Settings (Administrator): Paper Tray

Use this setting to change the tray that is selected by default.

14