Sharp MX-6200N Storing Frequently Used Original Sizes, Storing original sizes editing/clearing

(1), (2) (3)

Original			OK
Size Input		Cancel	OK
X	420	mm(64~432)
Y	297	mm(64~297)

2

Enter the original size.

(1)Enter the X (horizontal) dimension of the original.

With the [X] key highlighted, enter the X (horizontal)

dimension of the original with the keys. When the document glass is used, a number from 64 mm to

432 mm (2-1/2" to 17") can be entered.

When the automatic document feeder is used, a number from 140 mm to 432 mm (5-1/2" to 17") can be entered. If the horizontal dimension of the original is less than 140 mm (5-1/2"), use the document glass.

(2)Enter the Y (vertical) dimension of the original.

Touch the [Y] key and enter the Y (vertical) dimension of

the original with the keys. When the document glass is used, a number from 64 mm to 297 mm (2-1/2" to 11-5/8") can be entered.

When the automatic document feeder is used, a number from 131 mm to 297 mm (5-1/8" to 11-5/8") can be entered.

If the vertical dimension of the original is less than 131 mm (5-1/8"), use the document glass.

(3) Touch the [OK] key.

You will return to the base screen.

Make sure that the entered dimensions appear in the [Original] key.

STORING FREQUENTLY USED ORIGINAL SIZES

You can save special original sizes that you frequently use. This section explains how to store, retrieve, change, and delete special original sizes.

Storing original sizes (editing/clearing)

Up to 9 special original sizes can be stored.

Touch the [Original] key in the base screen of copy mode and then follow the steps below.

1

Original					OK
	Auto
		A4
	Manual
	A5		B5R	B4	AB

A5R A4 A3 Inch

Touch the [Custom Size] key.

B5A4R

Size Input Custom Size

33