Sharp MX-5500N manual ADJUSTING RED/GREEN/BLUE IN COPIES RGB Adjust, Adjust red, green, or blue

ADJUSTING RED/GREEN/BLUE IN COPIES (RGB Adjust)

This feature is used to strengthen or weaken any one of the three colour components R (red), G (green), or B (blue).

R(Red)+

G(Green)+

B(Blue)+

1	Place the original.
	Place the original face up in the document feeder tray, or face down on the document glass.
	Select the special modes.
	(1)	Touch the [Special Modes] key.
2	(2)	Touch the	keys to switch through the screens.

(3)Touch the [Colour Adjustments] key.

(4)Touch the [RGB Adjust] key.

☞[Colour Adjustments] KEY (page 115)

(2) (1) (3)

Colour Adjustments OK

	RGB Adjust			Cancel		OK
	Only one colour can be adjusted.
3
		R(Red)	G(Green)		B(Blue)

-2 -1 0 1 2

Adjust red, green, or blue.

(1) Touch the key of the colour that you wish to adjust: [R (Red)], [G (Green)], or [B (Blue)].

Only one colour can be adjusted. (If you adjust one colour and then adjust another colour, the adjustment of the first colour is cancelled.)

(2) Adjust the selected colour.

Touch the [+] key to strengthen the selected colour, or touch the [-] key to weaken the colour.

(3) Touch the [OK] key.

You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode.

4

To cancel scanning and copying...

Press the [STOP] key ( ).

Press the [COLOUR START] key ( ).

Copying will begin.

If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the

[COLOUR START] key ( ). Repeat until all pages have been scanned and then touch the [Read-End] key.

To cancel an RGB adjust setting...

Touch the [Cancel] key in the screen of step 3.

116