Sharp MX-5500N manual PRINTING THE DATE AND A STAMP ON COPIES Stamp, Maximum number, of positions

PRINTING THE DATE AND A STAMP ON COPIES (Stamp)

Use this function to print the date, a stamp, the page number, and text on copies.

Six printing positions are available: top left, top centre, top right, bottom left, bottom centre, and bottom right.

The printing positions are separated into areas that are used for the date, page number and text (A below), and areas that are used for a stamp (B below).

Top left

A

Bottom left

Top centre				Maximum number
	Top right	Stamp	Print area
				of positions
		Date	A	1 position only
		Stamp	B	6 positions
	B
		Page	A	1 position only
		Numbering
		Text	A	6 positions

Bottom right

Bottom centre

• If the selected stamp content of one position overlaps the stamp content of another position, priority will be given in the following order: right side, left side, centre. Content that is hidden due to overlapping will not be printed.

•Text will be printed at the preset size regardless of the copy ratio or paper size setting.

•Text will be printed at the preset exposure regardless of the exposure setting.

•Depending on the size of the paper, some printed content may be cut off or shifted out of position.

When used in combination with other special modes

When Stamp is used in combination with the following special modes, the special modes are reflected in the stamp content.

Special Modes	Printing
Margin Shift	Together with the image, the stamp content is shifted the amount of the margin width.
Dual Page Copy	The stamp is printed on each copy sheet.
Pamphlet Copy	The stamp is printed on each page of the resulting pamphlet or book.
Book Copy
Multi Shot	The stamp is printed on each copy sheet.
Card Shot
Covers/Inserts	Use the stamp settings to select whether or not the item is printed on inserted covers and
	inserts.

When used in combination with "Erase", "Job Build", or "Mirror Image", the stamp is printed in the set position as usual.

86