Sharp MX-5500N manual Making Copies Using The Bypass Tray, Place paper in the bypass tray, 100%

MAKING COPIES USING THE BYPASS TRAY

In addition to plain paper, the bypass tray allows you to make copies on transparency film, envelopes, tab paper, and other special media.

For detailed information on paper that can be loaded in the bypass tray, see the Safety Guide. For precautions when loading paper in the bypass tray, see "LOADING PAPER IN THE BYPASS TRAY" in the User's Guide.

1

2

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.

Place paper in the bypass tray.

Insert the paper with print side face down.

However, if the paper type is "Letter Head" or "Pre-Printed", load the paper with the print side face up*.

* If "Disabling of Duplex" is enabled in the system settings (administrator), load the paper in the normal way (face up in trays 1 to 5; face down in the bypass tray).

When loading paper larger than A4R or 8-1/2" x 11"R, be sure to pull out the bypass tray extension. Pull the bypass tray extension all the way out. If the bypass tray extension is not pulled all the way out, the size of the loaded paper will not be correctly displayed.

3

Colour Mode								Special Modes
Full Colour
								2-Sided Copy
							Plain
							A4
								Output
Exposure
		1.		2.
		A4		A4
Auto		3.	A3					File
		4.	B4
								Quick File
Copy Ratio	Original				Paper Select
100%	Auto					Auto
						A4

A4 Plain

Touch the [Paper Select] key.

41