Sharp MX-5500N, MX-6200N manual Making A Copy Using The Document Glass, 100%, Document glass scale

MAKING A COPY USING THE DOCUMENT GLASS

To make a copy of a book or other thick original that cannot be scanned with the automatic document feeder, open the automatic document feeder and place the original on the document glass. This section explains how to make a copy (1-sided copy of a 1-sided original) using the document glass.

Original size

detector

Open the automatic document feeder, place the original face down on the document glass, and then gently close the automatic document feeder.

1

Document glass scale

mark

A5 (5-1/2" x 8-1/2")

B5

A4 (8-1/2" x 11")

Document glass scale

mark

B5R

A4R (8-1/2" x 11"R)

B4 (8-1/2" x 14")

A3 (11" x 17")

•Align the corner of the original with the tip of the arrow mark

on the document glass scale.

•Place the original in the appropriate position for its size as shown above.

Do not place any objects under the original size detector. Closing the automatic document feeder with an object underneath may damage the original size detector plate and prevent correct detection of the document size.

2

Colour Mode								Special Modes
Full Colour
								2-Sided Copy
							Plain
							A4
								Output
Exposure		1.		2.
		A4		A4
Auto		3.	A3					File
		4.	B4
								Quick File
Copy Ratio	Original				Paper Select
100%	Auto					Auto
						A4

A4 Plain

Check the paper to be used and the colour mode.

Make sure that the desired paper (tray) and colour mode are selected.

•To change the paper (tray), touch the [Paper Select] key.

☞PAPER TRAYS (page 14)

•To change the colour mode, touch the [Colour Mode] key.

☞COPY COLOUR MODES (page 24)

Depending on the size of the placed original, there may be cases where the same size of paper as the original is not selected automatically. In this event, change the paper size manually.

17