|
| Programme chart |
| 1 | |
|
| Defy Dishmaid 3 |
| ||
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| 1 | 2 | 3 |
| |
Programme |
|
|
|
|
|
symbols and |
|
|
|
|
|
temperatures | Eco | Intensive |
| ||
|
| 50°C | 65°C |
| |
| Most economic | Heavily soiled | |||
| and loosen residue | programme for | dishes requiring | ||
| - awaiting full load | normally soiled | Hot | ||
| - then select a | dishes |
|
|
|
| Programme |
|
|
|
|
Detergent |
|
|
|
|
|
compartment | - | A+B | A+B |
| |
A=25 cm³ / |
| ||||
15cm³ B=5 cm³
Programme | Prewash | Prewash | Prewash |
sequence |
|
|
|
| End | 50 °C wash | 65 °C wash |
|
| Cold rinse | Cold rinse |
|
| Hot rinse | Hot rinse |
|
| Drying | Drying |
|
| End | End |
Consumption |
|
|
|
figures |
|
|
|
Water (Liter) | 4,2 | 15 | 17,5 |
Energy (kWh) | - | 1,05 | 1,67 |
Duration (min) | 14 | 136 | 115 |
Cancelling a programme
It is possible to cancel a programme while the machine is operating.
Press the start / stop button. The indicator light will switch off.
Press the start stop button once more and hold for 3 seconds. The indicator light will start flashing. Water in the machine will drain for about 45 seconds.
The programme is cancelled when the start/stop indicator light switches off. Depending on when the programme was cancelled, there may still be detergent residue or rinse aid on the dishes. Do not use these items until they have been washed properly.
Changing a programme
It is possible to change a programme while the machine is operating.
Press the start / stop button. The indicator light will switch glow.
Select a new programme.
Press the start/stop button. The indicator light will switch on and the new programme will start from the stage last carried out by the previous programme.
NOTE
For your convenience a programme guide is also printed on the top edge of the dishwasher door
13
