Dear
Customer
You are now the proud owner of one of the finest and most modern products that today's technology can produce.
Please read all the instructions carefully as they contain information on how to operate and care for your dishwasher so that you may gain the maximum benefit from it.
Store this book in a safe place for future reference.
Before use
Unpacking
Remove all packaging material, accessories and documentation from the machine.
Damage
Do not use the machine if it has been damaged in transit. Report the damage to your dealer, who will take the necessary corrective action.
Positioning the dishwasher
The machine should be positioned in close proximity to a cold water tap and a drain outlet.
Adjust the feet by turning them in or out until the machine stands level and stable.
Preparation
Every dishwasher is tested and run in the factory before being dispatched. Before washing dishes for the first time, it is advisable to first complete a
Electrical connection
The machine should be connected to a 15 Amp, 230 Volt 50 Hz, earthed, 3 pin wall socket.
For safety reasons, the wall socket and the plug should be accessible after installation.
If the power cord should ever need replacing, use only a genuine cord available from the nearest Defy Service Centre.
The machine must be earthed and the manufacturer and seller do not accept responsibility for any damage due to incorrect electrical connection.
Water connection
Connect the filler hose to a 3/4 gas threaded cold water tap.
The water supply pressure must be between 0.3 and 10 bars.
If the supply plumbing is new or has not been used for some time, it is advisable to run the water until it is clear and free from dirt.
Drain requirements
Secure the end of the drain hose to a drain pipe. Take care not to kink or twist the drain hose.
Drain hose
|
|
|
|
|
|
|
320 mm minimum |
|
|
|
| Drain pipe | |
800 mm maximum |
|
|
|
| ||
|
|
|
|
| ||
Floor level |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
| diameter | |||
|
| 40 mm inside | ||||
2
