Quick Clean Mode
•Cleans 30% faster by focusing cleaning on open areas.
•Activate by holding the Sweep or Mop button for 3 seconds.
•You will hear a single beep followed by the “start cleaning” song.
•Braava typically cleans the same total area as the standard detailed cleaning mode, but will skip detailed cleaning around furniture and some walls to save time.
Pause / Resume
Braava will automatically pause if you pick it up or press any button while cleaning.
•The cleaning mode button will flash blue to indicate the cleaning cycle is paused. While paused, Braava will save the map of the area it has already cleaned.
•To resume cleaning, place Braava within 6 feet of the Cube where it originally started, facing in the same general direction it started.
•Press the flashing cleaning mode button.
•Braava will start cleaning while it determines its position on the map. Once it confirms its position, it will drive to an area not yet covered and continue cleaning.
•Braava may
•If you resume Braava where you paused it, it may take longer for the cleaner to determine its position depending on its distance from the Cube.
•To exit Pause and quit the cleaning cycle, power Braava off by holding the power button for 2 seconds.
Note: Braava can only be paused after it has locked onto the NorthStar Navigation Cube at the beginning of the cleaning cycle.
global.irobot.com 15
