Scanning Film
35 mm Slides
c Align the Film Guide’s tab with the FILM symbol on the platen glass of the scanner.
Calibration Slot
dPlace a slide or slides face down (correctly
viewed from below) in the Film Guide as shown in the figure on the right.
120 Format Films
cAlign the Film Guide’s tab with the FILM
symbol on the platen glass of the scanner, then open the Film Holder and remove the
Film Retainer Sheet.
Calibration Slot
d e
Place the film face down. Close the Film Holder.
•Leave a gap of 5 mm (0.2 in.) or greater between films when placing two or more 120 format films on the platen glass.
•Ensure that there is no gap between the edge of the film and the Film Guide on the side near the Calibration Slot.
13