Scanning Film
6 Click Scan.
Do not move the scanner while it is operating.
7 When the preview is displayed, place a check mark beside the number(s) of the frame(s) you want to scan, and then click Scan to start scanning.
Do not move the scanner while it is operating.
8 When prompted that the scanning completed, click Exit.
9 Click Save to save the images and close MP Navigator EX.
• Do not leave the film strip in the Film Guide for an extended period of time as heat from the unit may damage the film.
•For more information on scanning film, see “Scanning Film” in
•When you finished scanning films, put the protective sheet back on the document cover. Insert the tab on the bottom of the protective sheet into the document cover, and push the top of the protective sheet to fit in until it clicks.
15