Still Images

Movies

Using the Self-Timer

With the self-timer, you can include yourself in group photos or other timed shots. The camera will shoot about 10 seconds after you press the shutter button.

1 Configure the setting.

zzPress the <m> button, choose [] in the menu, and then choose the []] option (=22).

zzOnce the setting is complete, []] is displayed.

2Shoot.

zzFor Still Images: Press the shutter button halfway to focus on the subject, and then press it all the way down.

zzFor Movies: Press the movie button.

zzOnce you start the self-timer, the lamp will blink and the camera will play a self- timer sound.

zzTwo seconds before the shot, the blinking and sound will speed up. (The lamp will remain lit in case the flash fires.)

zzTo cancel shooting after you have triggered the self-timer, press the <n> button.

zzTo restore the original setting, choose [] in step 1.

Still Images

Movies

Using the Self-Timer to Avoid Camera Shake

This option delays shutter release until about two seconds after you have pressed the shutter button. If the camera is unsteady while you are pressing the shutter button, it will not affect your shot.

zzFollow step 1 in “Using the Self-Timer” (=32) and choose [[].

zzOnce the setting is complete, [[] is displayed.

zzFollow step 2 in “Using the Self-Timer” (=32) to shoot.

Before Use

Basic Guide

Advanced Guide

Camera Basics

Auto Mode

Other Shooting Modes

PMode Playback Mode Setting Menu Accessories Appendix Index

32