Specifications

 

 

 

CanoScan 9900F

 

 

 

Scanner Type

 

Flatbed

 

 

 

Scanning Element

 

CCD 6-line color

 

 

 

Light Source

 

Cold cathode fluorescent lamp

 

 

 

Optical Resolution

 

3200 x 6400 dpi

 

 

 

Selectable Resolution

 

25 - 9600 dpi (ScanGear CS)

 

 

 

 

Scanning Bit Depth

 

Color

16 bit input / 16 bit or 8 bit output for each color (RGB)

 

 

 

 

Grayscale

16 bit input / 16 bit*1 or 8 bit output

 

 

Scanning Speed*2

 

Color

8.64 msec./line (1600 dpi), 8.64 msec./line (3200 dpi)

(Photo or Document)

 

Grayscale,B&W

8.64 msec./line (1600 dpi), 8.64 msec./line (3200 dpi)

 

 

 

 

Scanning Speed*2 (Film)

 

Color, GrayScale,

2.16 - 146.88 msec/line

 

B&W

 

 

 

 

 

 

 

Preview Speed*3

 

Approximately 3 sec.

Interface

 

USB 2.0 Hi-Speed

 

USB (USB 1.1 equivalent), IEEE1394 (FireWire)

 

 

 

 

 

 

Maximum Document Size

 

A4/Letter: 216 x 297 mm (8.5 x 11.7 in.)

 

 

 

 

 

 

 

35 mm strip (negatives/positives)/24 frames

 

 

 

 

Film Type/Number of Frames

35 mm slide (negatives/positives)/8 frames

 

120 format (negatives/positives)12 x 6 cm

 

 

 

 

 

 

 

 

 

 

4”x 5” format (negatives/positives)

 

 

 

Scanner Buttons

 

4 buttons: COPY, SCAN, FILE, E-MAIL

 

 

 

 

 

 

Temperature

10°C to 35°C (50°F to 95°F)

Operating Range

 

 

 

 

Humidity

10% to 90% RH, 20% to 80% RH when scanning film

 

 

(without condensation formation)

 

 

 

 

 

 

 

Power Requirements

 

AC adapter (100/120/230/240 V)*4

 

 

 

In operation: 19.5 watts maximum

Power Consumption

 

Stand-by: 6 watts

 

Power Switch Off: 0.1 watt

 

 

 

 

 

 

(Using supplied AC adapter)

 

 

Maximum Exterior Dimensions

290 x 509 x 127.3 mm (11.4 x 20 x 5 in.)

 

 

 

Weight

 

Approximately 5.2 kg (11.5 lbs.)

 

 

 

 

*1 Available only when scanning films.

*2 USB 2.0 Hi-Speed mode/IEEE1394 (FireWire) mode. Transfer time to computer is not included. *3 Calibration processing time is not included.

*4 Type of AC adapter depends on the area where the scanner is purchased.

• Specifications are subject to change without notice.

• Before you upgrade to Windows XP from Windows 98/Me/2000, you must uninstall ScanGear CS and CanoScan Toolbox using the “Uninstall the Software” menu of the CanoScan Setup Utility CD-ROM. The scanner may not work if you upgrade to Windows XP with these programs still installed. After upgrading to Windows XP, reinstall ScanGear CS and CanoScan Toolbox according to the steps on page 3. For details, please read the “Troubleshooting” section of the Scanning Guide (HTML format manual).

15