Trimming 
You can cut out a portion of a recorded image and save it as a new image file.
Trimming Area
Trimming Area Display
Recorded pixels after trimming
1 Choose [Trimming].
● Press the n button, choose the 1 tab and [Trimming], then press the m button.
2 Choose an image.
● Press the qr buttons to choose the image and press the m button.
3 Adjust the trimming area.
X A frame will appear around the portion of the image to be trimmed.
X The original image will display in the upper left and the trimmed image will display in the lower right.
●If you press the zoom button to the left or right, you can change the frame size.
●If you press the opqr buttons, you can move the frame’s position.
●If you press the l button, you can change the frame orientation.
●In an image with detected faces, gray frames appear around the faces located in the upper left image. The frames can be used for trimming. You can switch between frames by pressing the 0 button.
●Press the m button.
4 Save as a new image and display.
● Follow Steps 4 – 5 on p. 106.
•Images with a recording pixel setting of 
or 
, or images resized as 
cannot be edited.
•The width and height ratio of an image that can be changed is fixed at 4:3 (for a vertical image 3:4).
•The number of recorded pixels in a trimmed image will be smaller than before trimming.
107