Canon A710 IS Shoot, 2Shoot, 1 Select a movie mode using the or button

1 Select a movie mode using the or button.

zIn , or mode, you can change the recording pixels and frame rate (p. 37).

zFor and mode procedures, see “Changing the Color” (p. 57).

2Shoot.

zPressing the shutter button halfway automatically sets the exposure, focus and white balance settings.

zPressing the shutter button fully starts recording video and sound simultaneously.

zDuring shooting, the recording time and [zRec] appear on the LCD monitor.

zPressing the shutter button fully again stops recording. Recording will stop automatically under the following circumstances.

-When the maximum recording time elapses

-When the built-in memory or memory card becomes full

zYou are recommended to use a memory card that has been formatted in your camera to shoot movies (p. 26). The memory card supplied with the camera may be used without further formatting.

zBe careful of the following while recording.

-Do not touch the microphone (Basic Guide p. 1).

-Do not press any buttons other than the shutter button. The sound that buttons make will be recorded in the movie.

-The camera will automatically adjust the exposure and white balance to suit the shooting conditions during recording. Please note, however, that the sounds made by the camera automatically adjusting the exposure may

also be recorded.

zThe focus and optical zoom settings remain fixed for subsequent frames at the values selected for the first frame.

zDo not point the camera at the sun when shooting.

36