3Aim the camera so that the original color appears at the center of the LCD monitor and press the button.

zOnly one color can be specified.

zYou can use the or button to specify the range of colors that are swapped.

–5: Only takes the color that you want to swap.

+5: Also takes colors close to the one that you want to swap.

4Aim the camera so that the desired color appears at the center of the LCD monitor and press the button.

zOnly one color can be specified.

5Press to complete the setting, then shoot.

zThe default setting for color swap mode will change green into white.

zYou may not obtain the expected results if you use the flash. zThe colors specified in the color swap mode are retained

even if the camera’s power is turned off.

60