
Release Notes
Canon IP Cameras Supported on Digital Sentry
Integral Digital Sentry® digital video management systems (DVMS) support certain Canon® IP camera models. The camera models listed in this document can be used with Digital Sentry IP camera driver 6.8.0.126 and later. Refer to each camera’s table for information about the hardware and software features validated for use on a Digital Sentry system. Any general limitations or special instructions are listed at the beginning of the document, and any
To obtain the latest IP camera driver or documentation for use with Digital Sentry, refer to the Pelco Web site at www.pelco.com.
Canon VB-C50iR
Firmware | 1.2 Revision 68 |
|
|
Supported Resolutions | 640 x 480, 320 x 240, 160 x 120 |
|
|
Frames per Second (FPS) | 1 to 30 |
|
|
Number of Quality Settings | Not applicable |
|
|
Supported Codec | MJPEG |
|
|
Supported Motion Detection | Integral |
|
|
Pan/Tilt/Zoom (PTZ) | Yes (refer to NOTES) |
|
|
NOTES:
•To view live video on the camera’s Web page, you must install Java™. Visit the Java Web site at http://www.java.com, click the Free Java Download, and run the installer. (Do not select the installation of the Google™ toolbar.) When the installation is complete, refresh the live view on the Web page.
•Quality settings in DSAdmin do not work with this camera.
•Presets, iris, and focus functionality will be supported by Digital Sentry in a future release.
C1004RN (1/09) | Page 1 of 2 |