•Language for OCR

When the Apply OCR check box is selected, you can select from the list box the language of the text to be scanned.

•Apply OCR

Select this check box to cause printed characters in the image to be recognized and saved as text data attached to the recognized area.

Note

–For PDF files (*.pdf) with attached OCR information, document character strings scanned as images are recognized as text and saved as text data.

–When the Apply OCR check box is selected, deskewing is performed regardless of the scanner driver's Deskew setting. If you scan sizes smaller than the set scan size or you set the TWAIN driver Margin to a large value, the image is moved to the upper-left corner.

–Depending on documents, some images may be truncated if the Apply OCR box is selected. If this happens clear the Apply OCR check box.

•High-Speed (JPEG transfer)

High-Speed (JPEG transfer) can be enabled if your scanner supports JPEG transfers.

When the scanning mode specified during scanner setup is 256-level Gray or 24-bit Color, this feature applies JPEG compression to images transferred from the scanner to the computer.

3Click the OK button.

The PDF File Setting dialog box closes.

About Multi-Page Files

When scanning with Scan Batch to File (→P. 38) or Scan Batch to Mail (→P. 42) , and when performing Save Open Image (→P. 55) , the MultiPage function can be used to save multiple images to one TIFF or PDF file.

MultiPage Settings

MultiPage settings are made from a settings dialog box when Scan Batch to File (→P. 38) or Scan Batch to Mail (→P. 42) is selected for scanning.

Available MultiPage settings are determined by the file type (BMP, JPEG, TIFF or PDF) selected in the scan settings dialog box.

21