Canon CP-200, CP-300 manual Turning On the Printer, Place the printer on a flat surface

Turning On the Printer

5

1	4	2
		3
		To Power Outlet

Compact

At least 10 cm (4 inches) Power Adapter of open space

Refer to the above figure during the following procedure (the numbers in the figure correspond to the steps in the procedure).

1 Place the printer on a flat surface.

When printing, the paper temporarily projects out from the rear, so allow a clear space of at least 10 cm (4 inches) at the back.

2 Connect the supplied power cord to the CA-CP100 Compact Power Adapter (also supplied).

3

4

5

Plug the power cord into a power outlet.

Connect the Compact Power Adapter cable to the printer.

At this point the CP-200 is ON, so the printer’s indicator lights green.

Press the ON/OFF button (only on the CP-300).

When the printer is turned on, the printer's indicator lights green.

To Turn the Printer Off

•With CP-300: Press the ON/OFF button, releasing it when the indicator turns off.

•With CP-200: Unplug the Compact Power Adapter from the printer (the indicator turns off).

•When making connections, confirm that the shape of the plug matches the shape of the socket on the device being connected.

•The power outlet where the printer's power plug is connected should be located where the plug can be easily removed if a problem occurs.

16