Using the Battery Pack

Use the battery pack NB-CP2L (sold separately) for printing images in places without a power outlet. With a fully charged battery, you can print approximately 36 sheets* of Postcard size paper.

*The number of possible prints is based on Canon testing standards, and may change depending on printing conditions.

Installing the Battery

1

Remove the battery cover.

Slide and hold the cover lock (), then remove the cover

towards ().

Air Vents

2

3

Charging the Battery

Remove the battery terminal cover.

Attach the battery.

Insert the tab (), then push the battery () until it clicks and locks into place.

Plug in SELPHY (p. 10).

Charging starts and

 

 

 

appears on the screen.

 

 

 

 

Charging completes after

approximately 4 hours. and

 

 

 

 

disappears.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If you press the q button while the battery is charging (p. 11), SELPHY can be used; however, charging will stop.

When you turn SELPHY off (p. 11),

 

 

 

appears and

 

 

 

 

charging resumes.

 

 

 

 

For cautions concerning the battery, refer to the user guide included with the battery.

When

 

 

 

is displayed and you press any button other than the q button for 3 seconds or

 

longer,

 

 

 

 

will disappear. When the screen is turned off while the battery is charging and you

 

 

 

 

 

 

 

press any button other than the q button,

 

 

 

will appear after approximately 10 seconds.

 

 

 

 

 

If SELPHY is not used for more than five minutes, it will automatically turn off to save power.

If a red appears, the battery has reached the end of its life span. Purchase a new battery.

29