3

Set the paper.

Set the paper into the paper cassette that you prepared.

Shiny side

You can place up to 18 sheets in the paper cassette.

Inserting 19 or more sheets may damage the printer or

 

 

cause malfunction.

Hold the paper as shown in the illustration, with the shiny side facing up and put it into the paper cassette. Do not touch the print side (shiny side) of the paper with your

fingers. This may prevent you from making clean prints.

If a protective sheet is included with the paper, remove it and set the paper only into the cassette.

When making Postcard size prints that have a section for pasting a stamp, insert the paper so that the stamp section is facing the direction shown in the illustration.

4

Close the lid.

Close the inner lid until it clicks into place.

 

Leave the outer lid open during printing.

Use only dedicated paper for use in SELPHY CP series printers included in the genuine Canon brand

Color Ink Cassette/Paper Sets. Regular printing paper, regular postcards, or dedicated paper for SELPHY ES series printers cannot be used.

Never do the following, as it may result in failure or cause the printer to malfunction:

-reverse the paper (the shiny side is the print side)

-bend or separate the paper at the perforations before printing

-use label sheets that have begun to peel or label sheets with portions peeled back

-write on a sheet before printing

- print on already printed paper

 

- reuse a spent ink cassette

 

Do not touch the springs of the paper cassette.

 

If the springs are bent or deformed, paper will not feed correctly into

 

SELPHY.

 

Do not touch or scratch the print surface (shiny side), or touch the

 

paper with wet hands. If the print surface becomes dirty or wet, you

Spring

will not be able to make clean prints.