Manuals / Brands / Computer Equipment / Scanner / Canon / Computer Equipment / Scanner

Canon CR-50, CR-80 Turning OFF the Power, NOTE, CAUTION, 1 Turn OFF your computer, •Wait at least 10 seconds before turning the scanner back ON

1 21

3 Windows recognizes the CR-50/80 as new hardware, and installation starts automatically.

(Windows 7)

NOTE

The CR-50/80 will be registered as “CANON CR-50 USB” or “CANON CR-80 USB” in the Imaging Device directory.

1 Turn OFF your computer.2 To turn OFF the scanner, slide the Power Switch to the left.

(OFF)

CAUTION

•Wait at least 10 seconds before turning the scanner back ON.

•For your safety, disconnect the power plug from the power outlet if you are not using the scanner for a long period of time.

Contents

♦Please read this manual before operating this scanner READ CAREFULLY BEFORE OPENING THE SEALED DISK PACKAGE ■FCC REGULATIONS (For 120V model) ■RADIO INTERFERENCE REGULATIONS (For 120V models) ■RÈGLEMENT SUR LE BROUILLAGE RADIOÉLECTRIQUE (For 120V models) ■International ENERGY STAR® Office Equipment Program ■European Union (and EEA) only ■Trademarks ■Copyright ■Disclaimers INTRODUCTION Manuals for the CR-50/80 Symbols Used in This Manual Table of Contents INTRODUCTION Important Safety Instructions Packaging: What Is in the Box Preparation Before Use Important Safety Instructions Handling Disposal Installation Location Power Supply Moving the Scanner Packaging: What Is in the Box Preparation Before Use Setting Up the Scanner Checking Your Operating Environment Operating Systems: Specifications: Interface Cable Precautions for Use in 64-bitOperating Systems Connecting the Scanner to a Computer USB Connections Connecting the Power Cord Turning ON and OFF the Power Turning ON the Power Turning OFF the Power Preparing the Ink Cartridge About the Ink Cartridge Setting the Ink Cartridge and Adjusting the Print Position 4 Grasp the tag and then peel off the tape covering the ink jet nozzle 5 Place the ink cartridge shown in the diagram below 6 Push down the ink cartridge until it clicks into place 8 Carefully replace the Imprinter Cover 9 Gently close the Maintenance Cover until it clicks into place Document Feeding and Scanning Index