Manuals / Brands / Computer Equipment / Scanner / Canon / Computer Equipment / Scanner

Canon CR-50, CR-80 IMPORTANT, 8 Carefully replace the Imprinter Cover, 9 Gently close the Maintenance Cover until it clicks into place

1 21

Download 21 pages, 1.48 Mb

IMPORTANT

Make sure that the ink cartridge lock lever locks the ink cartridge into the correct position.

If the ink head drops back when installed, the two ink cartridge pins will not fit into the holes on the carriage. Push back the ink cartridge lock lever a in the direction of the arrow and reset the cartridge in the correct position b.

If the cartridge does not load properly, see step 7.

Ink Cartridge Lock Lever

7 Squeeze the Print Position Adjustment Lever and move it to adjust the print position.

Top:

50.5mm (1.99") from the bottom edge of the document Middle:

47 mm (1.85") from the bottom edge of the document Bottom:

43.5mm (1.71") from the bottom edge of the document

Ink Cartridge	Ink Cartridge
Holes	Pins

8 Carefully replace the Imprinter Cover.9 Gently close the Maintenance Cover until it clicks into place.

Contents

♦Please read this manual before operating this scanner READ CAREFULLY BEFORE OPENING THE SEALED DISK PACKAGE ■FCC REGULATIONS (For 120V model) ■RADIO INTERFERENCE REGULATIONS (For 120V models) ■RÈGLEMENT SUR LE BROUILLAGE RADIOÉLECTRIQUE (For 120V models) ■International ENERGY STAR® Office Equipment Program ■European Union (and EEA) only ■Trademarks ■Copyright ■Disclaimers INTRODUCTION Manuals for the CR-50/80 Symbols Used in This Manual Table of Contents INTRODUCTION Important Safety Instructions Packaging: What Is in the Box Preparation Before Use Important Safety Instructions Handling Disposal Installation Location Power Supply Moving the Scanner Packaging: What Is in the Box Preparation Before Use Setting Up the Scanner Checking Your Operating Environment Operating Systems: Specifications: Interface Cable Precautions for Use in 64-bitOperating Systems Connecting the Scanner to a Computer USB Connections Connecting the Power Cord Turning ON and OFF the Power Turning ON the Power Turning OFF the Power Preparing the Ink Cartridge About the Ink Cartridge Setting the Ink Cartridge and Adjusting the Print Position 4 Grasp the tag and then peel off the tape covering the ink jet nozzle 5 Place the ink cartridge shown in the diagram below 6 Push down the ink cartridge until it clicks into place 8 Carefully replace the Imprinter Cover 9 Gently close the Maintenance Cover until it clicks into place Document Feeding and Scanning Index