iR1210G_iR1230G.book Page 9 Tuesday, June 24, 2003 2:22 PM
Windows NT 4.0/2000/XP
USB Users
■Windows 2000/XP Plug and Play
Following is the installation procedure of plug and play for “Using USB Port” under Windows 2000.
Before you install the software, make sure you do the following:
•Connect the machine to your computer (
•Turn on the machine (
•Start up Windows 2000.
NOTE
.
Using USB Port (USB Cable)
In order to use the printer via USB, the following requirements need to be satisfied.
•Your computer must be equipped with a USB port and it is necessary that its operation is approved by the manufacturer.
•Windows NT 4.0 is not available for USB.
2
(Canon Advanced Printing
1Plug and Play will activate and the USB class driver, “USB Printing Support” is automatically detected and installed.
2Log on as member of Administrators. The full control access right for the printer is necessary 
for the installation of the CAPT.
Installing the Printer Driver