Canon DC 410 Manual Exposure Adjustment, Manual Focus Adjustment, POINTS TO CHECK, POINTS TO CHECK, necessary and press, 3Adjust () the focus as

Manual Exposure Adjustment

At times, backlit subjects may appear too dark (underexposed) or subjects under very strong lights may appear too bright or glaring (overexposed). To correct this, you can manually adjust the exposure.

( 21)

POINTS TO CHECK

Mode switch: (except for the

[ FIREWORKS] recording program).

EXP

NEXT

1 Press to display the joystick guide.

If [EXP] does not appear on the joystick guide, repeatedly push the joystick ( ) toward [NEXT] to display it.

2Push the joystick ( ) toward [EXP].

•The exposure adjustment indicator

and the neutral value “±0” appear on the screen.

•The adjustment range and the length of the exposure adjustment indicator will vary depending on the initial brightness of the picture.

•If you operate the zoom, the brightness of the image may change.

3Adjust ( ) the brightness of the

image as necessary and press .

•The exposure adjustment indicator will change to white and the exposure will be locked.

•During exposure lock, press and push the joystick ( ) toward [EXP] again to return the camcorder to automatic exposure.

Manual Focus Adjustment

Autofocus may not work well on the following subjects. In such case, focus manually.

•Reflective surfaces

•Subjects with low contrast or without vertical lines

•Fast moving subjects

•Through wet windows

•Night scenes

( 21)

POINTS TO CHECK

Adjust the zoom before you start the procedure.

Mode switch:

FOCUS

NEXT

1 Press to display the joystick guide.

If [FOCUS] does not appear on the joystick guide, repeatedly push the joystick ( ) toward [NEXT] to display it.

2Push the joystick ( ) toward [FOCUS].

“MF” appears.

3Adjust ( ) the focus as

necessary and press .

• The focus will be locked.

40 • Video