2Turn on the printer.

3Connect the camcorder to the printer using the supplied USB cable.

•Connection 2 . Refer to Connection Diagrams ( 64).

• appears and changes to .

IMPORTANT

•If continues to flash (for more than

1 minute) or if does not appear, the camcorder is not correctly connected to the printer. In such case, disconnect the USB cable and turn off the camcorder and the printer. After a short while, turn

them on again, set the camcorder to

mode and restore the connection.

•If the printer is connected to the camcorder while all still images or all print orders are being erased, the printer will not be recognized correctly.

NOTES

• will appear for images that cannot be printed.

•We recommend powering the camcorder using the compact power adapter.

•Refer also to the printer’s instruction manual.

•Connection to a PictBridge-compatible printer will not work when the memory card contains 1,800 still images or more. For best performance, we recommend keeping the number of still images on the memory card under 100.

Selecting the Print Settings

You can select the number of copies and other settings for printing. The setting options vary depending on your printer model.

( 21)

Options

[PAPER]

[ PAPER SIZE]: Available paper sizes vary depending on the printer model.

[ PAPER TYPE]: Select [PHOTO], [FAST PHOTO], [PLAIN] or [DEFAULT].

[ PAGE LAYOUT]: Select [DEFAULT], [BORDERED] or one of the following available page layouts.

[BORDERLESS]: The still image is enlarged and may be slightly cropped at the edges to fit the paper.

[2-UP], [4-UP], [8-UP], [9-UP], [16-UP]: Refer to the sidebar on page 60.

[ ] (Date print)

Select [ON], [OFF] or [DEFAULT].

[] (Print Effect)

Available only with printers compatible with the Image Optimize function. Select [ON], [OFF] or [DEFAULT].

Canon PIXMA/SELPHY DS printers: You can

also select [VIVID], [NR] and [VIVID+NR].

[] (Number of Copies)

Select 1-99 copies.

Photos • 59