Trimming
You can cut out a portion of a recorded image and save it as a new image file.
Choose [Trimming].
z Press the n button to choose [Trimming] in the 1tab, then press the m button.
| Choose an image. |
| z Press the qrbuttons to choose an image, |
Trimming Area | then press the m button. |
Trimming Area Display
Recorded pixels after trimming
Adjust the trimming area.
XA frame will appear around the portion of the image to be trimmed.
XThe original image will display in the upper left and the trimmed image will display in
the lower right.
zMove the zoom lever to change the frame size.
zress the opqr buttons to move the frame.
zPress the m button to change the frame orientation.
zPress the n button.
Save as a new image and display.
zFollow Steps 4 and 5 on p. 136.
137