Changing Shooting Function Settings
Grid lines will not be recorded on the image.
Changing the
zChoose [IS Settings], then press the m button.
zPress the op buttons to choose [IS Mode], then press the qr buttons to choose an option.
| Automatically sets the optimal | |
Continuous | image stabilization for the scene | |
| (Intelligent IS) (p. 185). | |
Shoot Only* | Image stabilization is only active | |
at the moment of shooting. | ||
| ||
Off | Turns off image stabilization. | |
|
|
*Setting changes to [Continuous] when shooting movies.
If camera shake is too strong, attach the camera to a tripod. You should also set the IS Mode to [ ff] when the camera is attached to a tripod.
Turning Off the Powered IS Function
Powered IS reduces subtle camera shake when shooting movies at max telephoto. However, shooting a moving subject while walking, or such things as severe camera movement may cause unexpected results in the movie. In such cases, set Powered IS to [Off].
zChoose [IS Settings], then press the m button.
zPress the op buttons to choose [Powered IS], then press the qr buttons to choose [Off].
[Powered IS] settings will be disabled if [IS Mode] is set to [Off].
167