Canon EOS 550D, EOS REBEL T2i 4 Set the printing effects, What is displayed on the screen

wPrinting

	4 Set the printing effects.
	Set as necessary. If you need not set
	any printing effects, go to step 5.
	What is displayed on the screen
	differs depending on the printer.
	Select the option on the upper right
	(circled in the screenshot), then press
	<0>.
	Select the desired printing effect, then
	press <0>.
	If the <e> icon is displayed next to
	<z>, you can also adjust the
	printing effect (p.182).
Printing Effect	Description

EOn	The image will be printed according to the printer’s standard
	colors. The image’s Exif data is used to make automatic
	corrections.
EOff	No automatic correction will be applied.
EVIVID	The image will be printed with higher saturation to produce
	more vivid blues and greens.
ENR	The image noise is reduced before printing.
0B/W	Prints in black-and-white with true blacks.

0Cool tone Prints in black-and-white with cool, bluish blacks.

0Warm tone Prints in black-and-white with warm, yellowish blacks.
zNatural	Prints the image in the actual colors and contrast. No
	automatic color adjustments are applied.
zNatural M	The printing characteristics are the same as the “Natural”
	setting. However, this setting enables finer printing
	adjustments than with “Natural.”
EDefault	The printing will differ depending on the printer. For details, see
	the printer’s instruction manual.

*When you change the printing effects, it is reflected in the image displayed on the upper left. Note that the printed image might look slightly different from the displayed image which is only an approximation. This also applies to [Brightness] and [Adjust levels] on page 182.

180