Preparation

The general procedure for sending images to a Web service is as follows.

1Prepare a computer on which EOS Utility has been installed.

Use the software CD-ROM provided with the camera to install EOS Utility.

2Access Canon website from the computer and sign up as a CANON iMAGE GATEWAY member (free of charge).

If you are already a member, proceed to step 3.

3Connect the camera and computer with an interface cable.

Before connection, set [Wi-Fi] to [Disable].

4Start EOS Utility on the computer, log in to CANON iMAGE GATEWAY, then configure the camera’s settings to enable access to Web services.

For details, refer to the EOS Utility instruction manual (CD-ROM).

5Connect to the wireless LAN access point from the camera

(p.106).

6Send images to a Web service registered on the camera

(p.120).

Still photos can be sent to CANON iMAGE GATEWAY and movies can be sent to YouTube.

You can share images with your family and friends by posting a link for the images on Facebook* or Twitter, or by sending it to email addresses registered on the camera.

*You can also upload images directly to Facebook.

Configuring Settings to Use Web Services

Start EOS Utility on the computer, log in to CANON iMAGE GATEWAY, then configure the camera’s settings to enable access to Web services. For details, refer to the EOS Utility instruction manual (CD-ROM).

105