Easy Connection via WPS (PIN Mode)

This is a connection mode available when using an access point compatible with Wi-Fi Protected Setup (WPS). In PIN code connection mode (PIN mode), an 8-digit identification number specified on the camera is set at the access point to establish a connection.

Even if there are multiple access points active in the surrounding area, a relatively reliable connection can be established using this shared identification number.

It may take about one minute to establish a connection.

If stealth functions of the access point are enabled, connection may be disabled. Deactivate stealth functions.

1

2

3

Select [Wi-Fi function].

Under the [53] tab, set [Wi-Fi] to [Enable], then select [Wi-Fi function].

Select an item.

Select either [q], [D], [l], or [], then press <0>.

Select [Infrastructure mode].

Displayed when [q] (Connect to smartphone) or [l] (Print from Wi-Fi printer) is selected.

Press the <V> key to select

[Infrastructure mode], then press <0>.

Select [OK] and press <0> to go to the next screen.

62