Easy Connection via WPS (PIN Mode)

4 Select [WPS (PIN mode)].

Press the <V> key to select [WPS (PIN mode)], then press <0>. Select [OK] and press <0> to go to the next screen.

5Specify the PIN code at the access point.

At the access point, specify the 8-digit PIN code displayed on the camera’s LCD monitor.

For instructions on setting PIN codes at the access point, refer to the access point’s instruction manual. After the PIN code is specified, select [OK] and press <0>.

6onnect to the access point.

Select [OK] and press <0> to establish a connection with the

access point.

XWhen a connection with the access point is established, the [IP address set.] screen is displayed.

7 Set the IP address.

Press the <V> key to select the content of IP address setting, then press <0>.

Select [OK] and press <0> to go to the next screen.

63