4 Customization

111

Assignable Buttons

The camera allows you to assign various functions to 15 buttons*. By assigning often-used functions, you can quickly access them with a single press of a button. Some assignable buttons are located on the monitor unit so their availability depends on the camera configuration used.

* In mode, only assignable buttons 1 to 9 are available.

Operating modes:

Changing the Assigned Function

1 Open the [Assign Button] submenu.

[wOther Functions] >[Assign Button]

2 Select the button to change and then press SET.

•A list of available functions appears.

•The quick reference to the right shows the default settings for each assignable button. Also, the label on the camera for assignable buttons 1 to 9 indicates the default setting*. By default, buttons 10 to 15 have no assignable function set.

* Assignable button 7 is usable only when you attach the grip unit of the C300 or C300 PL.

3 Select the desired function and then press SET.

•If you selected [User Setting (NONE)], the menu will change from orange to blue to indicate you are selecting a menu setting to register. Continue the procedure to register a menu setting. Otherwise, you do not need to perform the rest of the procedure.

[wOther Functions]

[Assign Button]

[1 MAGN.] [2 PEAKING] [3 ZEBRA] [4 WFM]

[5 LENS EXCHANGE] [6 LUT]

[7 MAGN.] [8 WFM]

[9 EDGE MON.] [10-15 (NONE)]

4 Navigate the menus to find the menu setting you want to register and then press SET.

•The selected menu setting will be registered to the customizable slot and to the assignable button.

•The name of the selected menu setting will be listed instead of [User Setting (NONE)] and the customizable slot will be marked by a ¥.