Connecting to an External Monitor
Using the MON. 1 and MON. 2 Terminals
During 4K and 2K modes, the camera can output video from the MON. 1 and MON. 2 terminals (MON. terminals). The signal that is output from the MON. terminals also includes audio, time code, metadata and clip
name information. In addition, the camera can apply onscreen markers, zebra patterns, peaking and145 magnification* to the MON. 1 terminal output. Perform the following procedures to enable output from the MON. terminals and to adjust other related settings.
* Magnification will simultaneously be applied to the MON. 2 terminal output.
Operating modes: 
Enabling Output from the MON. Terminals
1Open the [Output] submenu.
[
4K/2K/MXF Setup] >[MON. 1 & 2] >[Output]
2Select [On] and then press SET.
•Output is enabled for the MON. terminals.
•If you do not intend to use the MON. terminals, select [Off]. Doing so will also conserve the camera’s power.
Selecting the Resolution of the Output
When the resolution of the video configuration is [3840x2160], [3840x1080] or [1920x1080], the resolution of the output is automatically set to 1920x1080 so this procedure is not necessary.
1Open the [Resolution] submenu.
[ 
4K/2K/MXF Setup] >[MON. 1 & 2] >[Resolution]
2 Select [2048x1080] or [1920x1080] and then press SET.
Selecting the Scan Mode of the Output
When the recording mode of the video configuration is [HRAW] or [
1Open the [Scan Mode] submenu.
[
4K/2K/MXF Setup] >[MON. 1 & 2] >[Scan Mode]
2 Select [P] or [PsF] and then press SET.
Selecting the Resizing Method
When the recorded video and video output have a different aspect ratio, perform the following procedure to select how the video is output.
1Open the [Resize Output] submenu.
[
4K/2K/MXF Setup] >[MON. 1 & 2] >[Resize Output]
2 Select the desired option and then press SET.
[
4K/2K/MXF Setup]
[MON. 1 & 2]
[Output]
[On]
[
4K/2K/MXF Setup]
[MON. 1 & 2]
[Resolution]
[1920x1080]
[
4K/2K/MXF Setup]
[MON. 1 & 2]
[Scan Mode]
[P]
[
4K/2K/MXF Setup]
[MON. 1 & 2]
[Resize Output]
[Letterbox]