Charging the Battery Pack

Install the battery pack NB-ES1L and charge it.

• It takes approximately 4 hours to bring a depleted battery pack to a full charge state (based on standard Canon testing criteria).

-We recommend recharging the battery pack in a temperature of 5 - 40 °C (41 - 104 °F).

-The charging time will vary depending on the ambient temperature and charge state.

•If Auto Power Down is set to [On], the printer will automatically turn off when powered by the battery if it is not used for five minutes or more.

1 Install the battery pack in the printer.

 

• For details on how to install, refer to Installing

2

• The power lamp lights orange

 

the Battery Pack (p. 73).

 

 

while charging and turns off

 

 

 

once the battery pack is fully

 

 

 

 

 

 

 

 

 

 

charged.

2

Connect the compact power adapter to

 

• If the printer's power turns on

 

while charging the battery pack,

 

 

the printer.

 

 

 

charging will stop. If the power

 

 

 

 

 

is turned off again, charging will

Situate the printer with at least

 

 

 

resume.

 

 

 

• Turn the printer power off and

15 cm (6 in.) of free space in

 

 

 

 

 

 

turn it on again if the battery

front and back and at least 10

 

 

 

 

 

 

does not start charging.

cm (4 in.) of free space on the

 

 

 

sides.

 

 

 

 

 

 

 

15 cm

 

 

To power outlet

15 cm

(6 in.)

 

 

 

 

 

(6 in.)

10 cm

 

 

 

 

 

 

 

 

 

(4 in.)

 

 

•For more connection details, refer to Placing/ Connecting the Printer (p. 22).

•Charging starts.

3 Disconnect the compact power adapter cord from the printer once charging is complete.

74 Using the Battery Pack (SELPHY ES2 only)