CanoScan FS2720U Film Scanner

16

 

 

7.Open the dust cover.

•Insert your fingertips into the notch on either side of the dust cover and pull it gently down.

Dust Cover

8.Insert the film holder into the scanner.

•Hold the film holder horizontally on edge as shown below, orienting it so that the orange mark is on the left side. Insert it straight into the scanner until the orange mark on the guide lines up with the orange mark on the scanner.

Orange Marks

•If the film holder is inserted at an angle, the guide position may be altered and you may not be able to insert it properly.

•Ensure that the film holder is oriented according to the diagram below so that the guide is correctly inserted. The film holder will not fit correctly into the slot if the guide is incorrectly oriented.

Viewed from Above

The ‘R’ should be correctly oriented when viewed from the left.

The orange mark should be on the left.

•Film holders can be purchased separately if the supplied one is broken or damaged. Inquire at the distributor from which you purchased the scanner.